MSG here when You need macros

[aleyjuan]

hello men i need a macro use slime gobbler to clean slime fungus in the floor plx bro <3
thx for you help

[bosski]

Hello i need macro to change character at lv 8 to next at lv 2

[Eldogmariachi]

how can i make a macro check if i'm pressing certain hotkey?
Example:
2 {Dash} X:=Self.X() Y:=Self.Y() Z:=Self.Z() Tibia.KeyDown(45) Self.MoveE()

it just ignores the "tibia.keydown" and go east without checking if i'm holding or pressing any key.

Example 2:
2 {hotkey} Tibia.KeyDown(45) Self.Inventory.Ring()==0 Tibia.SendKey(33)

this one ignores the "tibia.keydown and the self.inventory.ring" and just press the hotkey nonstop

[Catar]

100 {Dash} Tibia.KeyDown(45)==1 Self.MoveE()

btw u have dash in Basic War tab


Tibia.KeyDown(keyID) gives u back value 1 when its pressed or 0 when isn't
what u do with that u need to define with == , <> etc

[Benus]

Pol.
potrzebuje macro na otwieranie loota w czasie bicia potworów

Eng.
needs a macro to open loot during the beating monsters

Oraz
And

Pol.
jest macro na bicie lepszego potwora gdy np. atakuje słabszgo a silniejszy wejdzie na ekran

Eng.
is close to beating the monster better when, for example. attacking the weaker and the stronger will come on screen

[Catar]

1
There is no such macro, and not possbile so to do yet.

2.
Bot will always finish attacking monster which it already started.
U can change priorities on monsters it will affect in certain way, which monsters it will attack next if they're already close.

[Eldogmariachi]

Is it possible to pull every item around you to your feet?
Example:
200 {Push MAX } ID:=3031 ## ID OF ITEM ON GROUND X:=Self.X Y:=Self.Y Z:=Self.Z Map.PickUp(!ID!, -1, 0, !X!, !Y!, !Z!)<>1 VarSub(Y, 1) Map.PickUp(!ID!, -1, 0, !X!, !Y!, !Z!)<>1 VarAdd(X, 1) Map.PickUp(!ID!, -1, 0, !X!, !Y!, !Z!)<>1 VarAdd(Y, 1) Map.PickUp(!ID!, -1, 0, !X!, !Y!, !Z!)<>1 VarAdd(Y, 1) Map.PickUp(!ID!, -1, 0, !X!, !Y!, !Z!)<>1 VarSub(X, 1) Map.PickUp(!ID!, -1, 0, !X!, !Y!, !Z!)<>1 VarSub(X, 1) Map.PickUp(!ID!, -1, 0, !X!, !Y!, !Z!)<>1 VarSub(Y, 1) Map.PickUp(!ID!, -1, 0, !X!, !Y!, !Z!)<>1 VarSub(Y, 1) Map.PickUp(!ID!, -1, 0, !X!, !Y!, !Z!

Instead of looking for an ID it just pull everything around you and drags it under your character.
I know that if i used map.throw "self" instead of map.pickup it would throw the items underneath me, but is it possible to pull everything without calling for an ID?

[Catar]

It's build in I believe cgeck. Shift+ctrl on tibia window

[teiito]

Hello
I wanted to create macro which close tibia after dead.
Did I made it correct?
Self.Health()<=0
Tibia.Close()

[Catar]

u can use protector for that, no macro

[Eldogmariachi]

It's build in I believe cgeck. Shift+ctrl on tibia window

No it's not
Any sugestions on how to make it? is it even possible without calling every single item ID?

[Catar]

Yes it is... when u die, u are 'disconected' if u dont click 'YES' in time after death.


And when u disconect, protector can turn off ur tibia, and even computer if you want.
Just look at the screen that I gave you, and dont argue with me...

[Eldogmariachi]

Yes it is... when u die, u are 'disconected' if u dont click 'YES' in time after death.


And when u disconect, protector can turn off ur tibia, and even computer if you want.
Just look at the screen that I gave you, and dont argue with me...

i was asking about this:

Is it possible to pull every item around you to your feet?
Example:
200 {Push MAX } ID:=3031 ## ID OF ITEM ON GROUND X:=Self.X Y:=Self.Y Z:=Self.Z Map.PickUp(!ID!, -1, 0, !X!, !Y!, !Z!)<>1 VarSub(Y, 1) Map.PickUp(!ID!, -1, 0, !X!, !Y!, !Z!)<>1 VarAdd(X, 1) Map.PickUp(!ID!, -1, 0, !X!, !Y!, !Z!)<>1 VarAdd(Y, 1) Map.PickUp(!ID!, -1, 0, !X!, !Y!, !Z!)<>1 VarAdd(Y, 1) Map.PickUp(!ID!, -1, 0, !X!, !Y!, !Z!)<>1 VarSub(X, 1) Map.PickUp(!ID!, -1, 0, !X!, !Y!, !Z!)<>1 VarSub(X, 1) Map.PickUp(!ID!, -1, 0, !X!, !Y!, !Z!)<>1 VarSub(Y, 1) Map.PickUp(!ID!, -1, 0, !X!, !Y!, !Z!)<>1 VarSub(Y, 1) Map.PickUp(!ID!, -1, 0, !X!, !Y!, !Z!

Instead of looking for an ID it just pull everything around you and drags it under your character.
I know that if i used map.throw "self" instead of map.pickup it would throw the items underneath me, but is it possible to pull everything without calling for an ID?

[Eldogmariachi]

How can i make this line of macro throw the item(2984) 1 SQM to the "east"(Any Direction) of my character?

2 {Example} X:=Self.X() Y:=Self.Y() Z:=Self.Z() Tibia.IsKeyDown(45)==1 Map.Thrown(2984, 1, !X!, !Y!, !Z!)

[Catar]

How can i make this line of macro throw the item(2984) 1 SQM to the "east"(Any Direction) of my character?

2 {Example} X:=Self.X() Y:=Self.Y() Z:=Self.Z() Tibia.IsKeyDown(45)==1 Map.Thrown(2984, 1, !X!, !Y!, !Z!)

U can manipulate variables with basic math, like adding, substracting, multiplying and dividing.

If u want throw item 1 sqm to east you need to add 1 to the X
VarAdd(X, 1)

If u want to throw west, you need to substract 1 from X
VarSub(X, 1)

north would be Y+1
and south Y-1

[Eldogmariachi]

Is it possible to pull every item around you to your feet?
Example:
200 {Push MAX } ID:=3031 ## ID OF ITEM ON GROUND X:=Self.X Y:=Self.Y Z:=Self.Z Map.PickUp(!ID!, -1, 0, !X!, !Y!, !Z!)<>1 VarSub(Y, 1) Map.PickUp(!ID!, -1, 0, !X!, !Y!, !Z!)<>1 VarAdd(X, 1) Map.PickUp(!ID!, -1, 0, !X!, !Y!, !Z!)<>1 VarAdd(Y, 1) Map.PickUp(!ID!, -1, 0, !X!, !Y!, !Z!)<>1 VarAdd(Y, 1) Map.PickUp(!ID!, -1, 0, !X!, !Y!, !Z!)<>1 VarSub(X, 1) Map.PickUp(!ID!, -1, 0, !X!, !Y!, !Z!)<>1 VarSub(X, 1) Map.PickUp(!ID!, -1, 0, !X!, !Y!, !Z!)<>1 VarSub(Y, 1) Map.PickUp(!ID!, -1, 0, !X!, !Y!, !Z!)<>1 VarSub(Y, 1) Map.PickUp(!ID!, -1, 0, !X!, !Y!, !Z!

Instead of looking for an ID it just pull everything around you and drags it under your character.
I know that if i used map.throw "self" instead of map.pickup it would throw the items underneath me, but is it possible to pull everything without calling for an ID?

[barbilla]

i need macro for use the pick in a hole

[Catar]

i need macro for use the pick in a hole

map tool in cavebot

[barbilla]

barbilla Wrote:
i need macro for use the pick in a hole

map tool in cavebot

---------------------------------------
catar help me map tool

[Catar]

catar help me map tool

http://wiki.bmega.net/doku.php?id=add_ty...p&s[]=tool